Mobridge DA-G2 Pro A2B Ford

The mObridge DA-G2.Pro A2B pre-amplifier provides a connection between the in-vehicle A2B system with any aftermarket analog/digital DSP/amplifier.

It provides 10 channels of RCA analog outputs, a TOSLINK output, and an amplifier turn on/off control. Multi-vehicle compatibility is provided via DIP switches, and a USB connection can be used to connect it to the mObridge DSP user interface for configuration and firmware updates.

The DA-G2.Pro A2B also allows adjustment of the mono sinks such as Phone, Navigation, PDC and Voice recognition to compensate for OEM systems that may need adjustment.  The DA-G2.Pro also allows the mono sink channels to bypass the time buffering to avoid delays and issues such as echo cancellation and delayed reverse park beeps.  The DA-G2.Pro is the most advanced OEM DSP available for these vehicles.

The DA-G2.Pro A2B is a complete DSP solution, with advanced DSP algorithms. If only basic analog + TOSLINK outputs are required, the DA-G2.Standard A2B Ford can be used. Where only basic TOSLINK outputs are required, the DA-G2.Entry A2B Ford can be used.

DESCRIPTION

• The DA-G2.Entry A2B has been specifically designed for A2B systems to interface seamlessly into the vehicle bus network for unprecedented control and audio reproduction.

  Blackfin DSP

  The heart of the device is a 533MHz Blackfin Digital Signal Processor (DSP). The DA-G2.Entry A2B allows for mono channel gain adjustment only (phone, Nav, PDC etc) via the PC interface. It does not contain any advanced DSP processing beyond what the vehicle controls provide such as bass, treble, balance, and fade etc.

  Burr-Brown

  The pre-amp stage is driven by a Burr Brown DAC converter, providing an audiophile quality without compromise.

  Seamless Integration

  The DA-G2.Entry A2B interfaces seamlessly with the controls of the vehicle. Volume, fade, balance, bass, and treble remain completely controllable via the existing vehicle controls, and all factory audio such as parking sensors, navigation, voice, and telephone are integrated to behave exactly as per the original system. This means that unlike other integration options, there is no need for mounting of any additional controls inside the vehicle. The vehicle will look and feel stock, with exceptional audio quality.

  mObridge DSP User Interface

  The DA-G2.Entry A2B utilizes the mObridge DSP desktop application for Windows/macOS to harness the full potential of the DSP. The application is also able to provide automatic online firmware updates.

  • Windows/macOS: mObridge DSP application

  Note: This product is only compatible with Ford vehicles equipped with the B&O A2B audio systems.

Vehicle Compatibility

Analog Outputs

• 10 channels RCA full-range
• 4V RMS
• 192kHz Sampling 24-bit digital to analog converter (DAC)

Digital TOSLINK Output

• Stereo TOSLINK output

Vehicle Interface

• Support for volume/fade/balance on factory radio and/or steering wheel
• Support for all factory-fitted audio sources (eg telephone/navigation/voice recognition/television/dvd) (where applicable)
• Support for reverse park sensor audio overlay (where applicable)

KIT INCLUDES

• Wiring harness
• 8x RCA plug adapter
• A2B install booklet
• DA-G2.Entry A2B instructions